跳到正文
The Elec· Hyun-Seon, Park·· 4 天前AI 評分69

關鍵基礎設施使用的 TCP/IP 堆疊發現 66 個零日漏洞

​66 Zero-Day Vulnerabilities Found in TCP/IP Stacks Used in Critical Infrastructure

AI 導讀

Forescout 研究部門 Vedere Labs 分析 10 款廣泛使用的 TCP/IP 堆疊,發現 99 個漏洞,其中 66 個此前未曾披露,相關設備包括 OT、IoT 及醫療設備。

正文

​A total of 66 previously unknown security vulnerabilities have been discovered in foundational networking software (TCP/IP stacks) embedded deep within critical infrastructure equipment, including operational technology (OT), Internet of Things (IoT) devices and medical equipment. The findings also revealed that even core software that had undergone security audits for years still contained critical flaws.

​According to Industrial Cyber, Forescout's research division Vedere Labs identified 99 vulnerabilities after conducting an in-depth analysis of 10 widely used TCP/IP stacks. Of these, 66 were previously unreported vulnerabilities. New flaws were discovered in seven of the 10 stacks, even though they had already undergone manual analysis.

​Most of the newly identified vulnerabilities were high-risk flaws capable of compromising or disabling systems, rather than simple software errors. Under the Common Vulnerability Scoring System (CVSS), 52% of the findings were classified as high (47%) or critical (5%) severity. Medium-severity vulnerabilities accounted for 45%, while only 3% were rated low.

​CVSS is an international standard for assessing the severity of security vulnerabilities. The specifications are developed and maintained by the Forum of Incident Response and Security Teams (FIRST), a nonprofit cybersecurity organization in the United States. The National Institute of Standards and Technology (NIST) provides vulnerability information and calculates and publishes CVSS scores through its National Vulnerability Database (NVD).

​Industrial Cyber reported that Siemens acknowledged its building automation controller product lines — APOGEE, Desigo and TALON — were affected by the flaws after Forescout notified the company that the Nucleus NET stack embedded in the products was vulnerable.

​Forescout announced that it had used artificial intelligence (AI) to identify 66 previously unknown vulnerabilities in TCP/IP stacks more quickly and at lower cost. (Source: Forescout)
​Forescout announced that it had used artificial intelligence (AI) to identify 66 previously unknown vulnerabilities in TCP/IP stacks more quickly and at lower cost. (Source: Forescout)

Forescout researchers developed a proprietary analysis framework based on Anthropic's Claude models, combining static analysis, reverse engineering and dynamic emulation to identify the vulnerabilities. AI was used to review findings from existing analysis tools and assess their potential for exploitation, while researchers participated in dynamic validation to confirm whether the flaws were genuine.

​Memory Corruption Dominates Core Networking Layer Flaws

​The vulnerabilities were identified across various components of the TCP/IP stacks. The largest number were found in core networking layers, including IP, TCP, UDP, ICMP and Ethernet. Flaws were also discovered in higher-level components and management functions, including HTTP web servers and Telnet.

​By affected component, core IP, TCP, UDP, ICMP and Ethernet layers accounted for the largest share at 29%. They were followed by HTTP and web servers (15%); IPv6, Neighbor Discovery (ND), the Routing Protocol for Low-Power and Lossy Networks (RPL), and DHCP clients (10% each); Telnet (7%); and DNS and management command-line interfaces (CLI), at 2% each.

​An analysis of all 99 identified vulnerabilities by type found that memory corruption bugs accounted for the largest share, at 49%. These included out-of-bounds memory reads and writes and buffer overflows. Integer-related flaws, including underflows, overflows and signedness errors, accounted for 27%, followed by input validation flaws, such as missing checks and null-termination errors, at 16%. Control-flow and logic bugs, including infinite loops and null pointer dereferences, made up the remaining 8%.

​A null pointer dereference occurs when a program attempts to access memory through an invalid null pointer. This can cause a program to terminate unexpectedly or interrupt specific system services, potentially resulting in a denial-of-service (DoS) condition. Depending on the equipment's operating architecture, the disruption could extend to control functions being halted or the system restarting.

​Memory corruption flaws, which accounted for 49% of the findings, can occur when a TCP/IP stack fails to properly validate the length or format of incoming network packets, causing it to access an incorrect memory location or overwrite data. If an attacker sends specially crafted network packets to trigger memory corruption, the result could be a service disruption or system crash. Depending on the vulnerability and attack conditions, some flaws could also enable remote code execution.

​Newly discovered vulnerability types and descriptions. (Source: Forescout)
​Newly discovered vulnerability types and descriptions. (Source: Forescout)

Forescout said 54 of the 66 newly discovered vulnerabilities were considered to affect currently available versions of the software, and the company notified the relevant manufacturers and project maintainers. Of those 54 vulnerabilities, 20 affected open-source stacks and 34 affected proprietary intellectual property (IP) software stacks.

​The remaining 12 vulnerabilities were considered not to affect the latest versions and were therefore excluded from the notifications. However, devices still running older versions containing these flaws could remain exposed. The problem is particularly acute for legacy equipment whose manufacturers have gone out of business, making security patches impossible to obtain.

​Forescout researchers analyzed the S1 stack in a third-party operating system embedded in the firmware of a discontinued wireless access point (AP). The analysis uncovered seven vulnerabilities, including a buffer overflow triggered through firmware uploads and hardcoded administrator credentials that could not be changed.

​A buffer overflow during firmware uploads occurs when the input data exceeds the memory buffer's permitted capacity, overwriting adjacent memory regions. An attacker exploiting the flaw could potentially alter program execution or run arbitrary code. This could enable the attacker to seize administrator privileges or take control of the network device.

​Immutable administrator credentials refer to administrator usernames and passwords for web and shell management interfaces that are hardcoded into the software and cannot be changed by users. If the management interface is accessible over a network, an attacker who knows or obtains the fixed credentials could gain administrator privileges. This could allow the attacker to modify device settings or seize control of the equipment. Conventional security measures, such as changing the password, would be ineffective.

​Forescout's security analysis framework used to identify the vulnerabilities. (Source: Forescout)
​Forescout's security analysis framework used to identify the vulnerabilities. (Source: Forescout)

​"Two-Decade-Old Stacks Pose Supply-Chain Security Risks"

​Forescout warned that the research highlights structural vulnerabilities in legacy software. In an earlier investigation under its Project Memoria program, a security research initiative focused on vulnerabilities in TCP/IP stacks, the company found that the stacks analyzed had an average age of about 20 years. Some had already reached end of support, while others were approaching the end of extended support in September 2027, following the end of general support in December 2025.

​Such aging TCP/IP stacks often continue to use code written decades ago and contain numerous functions that can be accessed without authentication, leaving them vulnerable to attacks. Because the same stacks are embedded as common components in industrial controllers, medical devices and network equipment from multiple manufacturers, a single flaw can expose hundreds of downstream products simultaneously, creating supply-chain risks.

​When the equipment is used on production lines, firmware validation can take considerable time, while shutting down operations to install security patches is often difficult. Older devices that have reached end of support may not receive corrective patches at all. Even when vulnerabilities are identified, applying fixes can take time.

​As practical defensive measures, △Forescout recommended prioritizing vulnerabilities based on their network reachability and operational impact △disabling high-risk services such as FTP, Telnet, IPv6 and web management interfaces, while using internal DNS △and adopting secure remote access based on the principle of least privilege rather than relying on conventional VPNs alone. The company also recommended isolating end-of-life (EoL) devices in restricted network segments that permit only essential communications, and requiring software bills of materials (SBOMs) and clearly defined support lifecycles from suppliers during the procurement process.

來源:The Elec · thelec.net